Cancel
Account
My Items
My Cart
OR
ECORR Systems helps manufacturers and maintenance teams select Cortec® cleaners based on the contaminant, metal type, cleaning process, equipment, rinsing requirements, and need for corrosion protection.
Filter
Sort By
Cortec VpCI®-422 | EcoAir Organic Rust Remover Aerosol | 14 oz VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal...
Cortec VpCI®-422 | EcoAir Organic Rust Remover Aerosol | 14 oz VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal without creating waste disposal difficulties and is more operator friendly than traditional rust removers. VpCI®-422 G is a modification of VpCI®-422, which is recom- mended for galvanized steel. It will not adversely affect most paints, plastics, wood, textiles, ceramics, or rubber when used as...
Cortec VpCI®-422 | Organic Rust Remover Liquid | 5 Gal VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal without...
Cortec VpCI®-422 | Organic Rust Remover Liquid | 5 Gal VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal without creating waste disposal difficulties and is more operator friendly than traditional rust removers. VpCI®-422 G is a modification of VpCI®-422, which is recommended for galvanized steel. It will not adversely affect most paints, plastics, wood, textiles, ceramics, or rubber when used as recommended....
Cortec VpCI®-422 | Organic Rust Remover Liquid | 55 Gal VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal without...
Cortec VpCI®-422 | Organic Rust Remover Liquid | 55 Gal VpCI®-422 effectively removes rust and tarnish from steel, iron, copper, and brass. VpCI®-422 removes corrosion from metal without creating waste disposal difficulties and is more operator friendly than traditional rust removers. VpCI®-422 G is a modification of VpCI®-422, which is recommended for galvanized steel. It will not adversely affect most paints, plastics, wood, textiles, ceramics, or rubber when used as recommended....
Cortec VpCI®-423 | EcoClean Organic Rust Remover Spray | (12) 16 oz VpCI®-423 is a rust remover that is harmless to people while effectively removing rust and tarnish from steel, iron, copper,...
Cortec VpCI®-423 | EcoClean Organic Rust Remover Spray | (12) 16 oz VpCI®-423 is a rust remover that is harmless to people while effectively removing rust and tarnish from steel, iron, copper, brass, chrome and aluminum. VpCI®-423 removes corrosion from metal without creating waste disposal difficulties. When used as recommended, VpCI®-423 will not harm human skin or adversely affect most paints, plastics, wood, textiles, ceramics or rubber. Removing corrosion from metal is easy. Apply...
Cortec VpCI®-423 | Organic Rust Remover Gel | 5 Gal VpCI®-423 is a water-based gel that effectively removes rust and oxides from steel, iron, brass, and copper. When used as recommended,...
Cortec VpCI®-423 | Organic Rust Remover Gel | 5 Gal VpCI®-423 is a water-based gel that effectively removes rust and oxides from steel, iron, brass, and copper. When used as recommended, VpCI®-423 will not adversely affect most paints, plastics, wood, textiles, ceramics, or rubber. VpCI®-423 is formulated to cling on vertical and overhead surfaces for rust and oxide removal in difficult-to-reach spaces. VpCI®-423 contains flash corrosion inhibitors to prevent flash corrosion during the...
Cortec VpCI®-423 | Organic Rust Remover Gel | 55 Gal VpCI®-423 is a water-based gel that effectively removes rust and oxides from steel, iron, brass, and copper. When used as recommended,...
Cortec VpCI®-423 | Organic Rust Remover Gel | 55 Gal VpCI®-423 is a water-based gel that effectively removes rust and oxides from steel, iron, brass, and copper. When used as recommended, VpCI®-423 will not adversely affect most paints, plastics, wood, textiles, ceramics, or rubber. VpCI®-423 is formulated to cling on vertical and overhead surfaces for rust and oxide removal in difficult-to-reach spaces. VpCI®-423 contains flash corrosion inhibitors to prevent flash corrosion during the...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Gel | 5 Gal VpCI®-426 Gel removes corrosion, scale and naturally occurring oxides from iron, carbon and stainless steel, copper, aluminum,...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Gel | 5 Gal VpCI®-426 Gel removes corrosion, scale and naturally occurring oxides from iron, carbon and stainless steel, copper, aluminum, magnesium and their alloys. VpCI®-426 Gel stays in place on vertical and difficult to treat surfaces where corrosion is heavy, allowing extra time for VpCI®-426 Gel to remove corrosion from the metal surface. VpCI®-426 Gel not only removes corrosion and scale, but also brightens aluminum and...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Liquid | 5 Gal VpCI®-426 is a water-based heavy duty concentrate designed to remove corrosion, scale and naturally occurring oxides from...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Liquid | 5 Gal VpCI®-426 is a water-based heavy duty concentrate designed to remove corrosion, scale and naturally occurring oxides from iron, carbon and stainless steel, copper, aluminum, magnesium and their alloys. VpCI®-426 not only removes corrosion and scale, but also brightens aluminum and copper. So safe, VpCI®-426 may be used for household tasks. Once corrosion has been removed, it is advised to use Cortec VpCI®-414 (1:5 and 1:10...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Liquid | 55 Gal VpCI®-426 is a water-based heavy duty concentrate designed to remove corrosion, scale and naturally occurring oxides from...
Cortec VpCI®-426 | Heavy Duty Cleaner Rust Remover Liquid | 55 Gal VpCI®-426 is a water-based heavy duty concentrate designed to remove corrosion, scale and naturally occurring oxides from iron, carbon and stainless steel, copper, aluminum, magnesium and their alloys. VpCI®-426 not only removes corrosion and scale, but also brightens aluminum and copper. So safe, VpCI®-426 may be used for household tasks. Once corrosion has been removed, it is advised to use Cortec VpCI®-414 (1:5 and...
ECORR Systems offers Cortec® cleaners and degreasers for removing oil, grease, dirt, processing fluids, fingerprints, salts, and other contaminants from metal parts, machinery, equipment, and industrial surfaces.
As an Authorized Cortec® Distributor, ECORR Systems helps manufacturers, maintenance teams, parts processors, and equipment operators select cleaning products based on the contaminant, substrate, application method, cleaning temperature, residue requirements, and need for corrosion protection after cleaning.
Conventional cleaning may leave freshly exposed metal vulnerable to flash rust, particularly when water-based products are used on ferrous metals. Selected Cortec® cleaners combine cleaning performance with corrosion-inhibiting technology to help protect metal during and after the cleaning process.
Depending on the formulation, a Cortec® cleaner may remove light oils, heavy grease, machining residue, salts, fingerprints, shop dirt, carbon deposits, or other industrial soils while providing temporary protection against corrosion.
Contaminants left on metal can interfere with coatings, adhesives, lubricants, assembly operations, inspection, packaging, and corrosion protection. Salts, acidic residue, fingerprints, and trapped moisture can also create localized corrosion during storage or shipment.
Proper cleaning helps establish a consistent surface for the next production or preservation step. The cleaning method should remove the targeted contamination without damaging the metal, coating, plastic, seal, or other materials present.
Water-based cleaners can provide an alternative to traditional solvent cleaning for many industrial applications. Depending on the formulation, they may be diluted to match the soil level and applied by spraying, wiping, immersion, pressure washing, or automated cleaning equipment.
Heavy-duty cleaners are formulated for demanding applications involving grease, oil, shop dirt, and other difficult industrial contaminants. Product concentration, dwell time, temperature, agitation, and rinsing requirements should be matched to the equipment and soil.
Low-foaming formulations are useful in spray washers, pressure-cleaning systems, flow-through equipment, and automated operations where excessive foam can interfere with cleaning performance or equipment operation.
Selected Cortec® cleaners leave corrosion inhibitors on compatible metal surfaces after cleaning. This can help reduce flash rust and provide temporary protection during in-process holding, inspection, assembly, packaging, or indoor storage.
ElectriCorr™ cleaners are formulated for compatible electrical and electronic equipment. Selected products can remove contamination while depositing a thin corrosion-inhibiting film on contacts, connectors, panels, motors, controls, and electronic assemblies.
Cortec® offers selected cleaners formulated with biobased ingredients or designed to meet specific environmental objectives. Biobased content, biodegradability, regulatory status, and safety characteristics apply to individual formulations and should be confirmed before selection.
Rust removers address corrosion products and metal oxides rather than ordinary grease and dirt. They may be appropriate when existing rust, tarnish, or scale must be removed before coating, packaging, assembly, or further processing.
» Cortec® VpCI®-414 Cleaner and Degreaser A water-based cleaning concentrate formulated to remove oil, grease, dirt, and related contaminants while providing corrosion protection to compatible metal surfaces.
» Cortec® VpCI®-415 Heavy-Duty Cleaner and Degreaser A heavy-duty cleaning formulation for demanding industrial and maintenance applications requiring effective cleaning and temporary corrosion protection.
» Cortec® VpCI®-416 Cleaner and Degreaser A cleaner designed for removing oils, greases, and industrial soils from compatible parts, equipment, and metal surfaces.
» ElectriCorr™ Cleaner and Protector Sprays Specialized cleaner and corrosion-protection products for compatible electrical contacts, components, controls, and electronic equipment.
» Cortec® Rust and Oxide Removers Liquid, gel, and other formulations for removing existing rust, oxides, tarnish, and scale from compatible metal surfaces.
A general cleaner is typically used for dirt, dust, fingerprints, light oils, and surface contamination. A degreaser is formulated to break down heavier oils, lubricants, grease, and industrial soils.
Some Cortec® products perform both functions, but cleaning strength, alkalinity, dilution, application method, and material compatibility vary. The product should be selected according to the heaviest soil present and the sensitivity of the surface being cleaned.
A cleaner or degreaser removes surface contaminants such as oil, grease, dirt, and processing residue. A rust remover reacts with or loosens existing corrosion products and metal oxides.
A heavily contaminated and rusted part may require both steps: cleaning or degreasing first, followed by rust removal. The surface may then need to be rinsed, neutralized, dried, or protected according to the selected products and next process.
Cortec® cleaners and degreasers may support several application methods, depending on the specific formulation:
Always confirm that the product is suitable for the intended equipment, temperature, pressure, and application method.
The correct product depends on the type and amount of contamination, substrate, cleaning equipment, process temperature, desired drying time, acceptable residue, corrosion protection requirements, and the next manufacturing or maintenance step.
Important questions include whether the cleaner must be low foaming, whether rinsing is possible, whether the cleaned part will be painted or packaged, and whether the formulation must be compatible with aluminum, copper, galvanized steel, plastics, elastomers, or existing coatings.
Concentrated cleaners should be diluted according to the current product instructions. A heavier soil may require a stronger concentration, longer dwell time, higher permitted temperature, or additional agitation. Excessively strong concentrations may waste product or create unnecessary rinsing and compatibility problems.
Never allow a cleaner to dry on the surface unless the technical data sheet specifically permits it. Test the product on a small, inconspicuous area when cleaning an unfamiliar substrate, coating, plastic, or elastomer.
Metal parts should be clean and dry before being enclosed in VpCI® bags, films, or papers. Fingerprints, salts, acidic residue, and contaminated process fluids can remain active inside a package and reduce the effectiveness of the preservation system.
When a corrosion-inhibiting cleaner is used, confirm whether its remaining film is compatible with the selected packaging material, coating, lubricant, or subsequent manufacturing operation.
Cleaner safety and environmental characteristics vary by formulation. Review the current safety data sheet for required personal protective equipment, ventilation, handling, storage, spill response, and disposal information.
Wastewater requirements depend on the cleaning product and the contaminants removed from the surface. A cleaner described as biodegradable or biobased does not automatically make contaminated wash water suitable for unrestricted discharge.
» Surface Preparation Products Rust removers, oxide removers, surface conditioners, and products for preparing metal before coating or preservation.
» Aerosols and Sprays Ready-to-use cleaners, electrical protectors, penetrants, lubricants, and corrosion preventative sprays.
» High-Performance Coatings Protective coatings for metal surfaces after cleaning and preparation.
» VpCI® Bags Clean corrosion protection for prepared metal parts during handling, storage, and shipment.
» Coating and Fluid Additives Corrosion-inhibiting additives for compatible cleaners, coatings, metalworking fluids, water systems, and industrial formulations.
ECORR Systems is an Authorized Cortec® Distributor helping manufacturers, maintenance professionals, parts processors, and industrial facilities select cleaners and degreasers for specific contaminants, substrates, and cleaning processes.
We can help evaluate the soil, metal type, application equipment, cleaning temperature, dilution, rinsing requirements, corrosion protection needs, and next process to identify an appropriate Cortec® cleaning product.
Depending on the formulation, Cortec® cleaners may remove oils, grease, dirt, salts, fingerprints, machining residue, shop soils, carbon deposits, and other industrial contaminants.
Selected Cortec® cleaners contain corrosion inhibitors that can help reduce flash rust and provide temporary protection after cleaning. Protection level and duration depend on the product, dilution, substrate, rinsing process, and storage environment.
Many Cortec® cleaners are supplied as concentrates and may be diluted according to the product instructions. The proper concentration depends on the soil level, cleaning method, temperature, and required corrosion protection.
Some formulations are designed for multi-metal cleaning, but compatibility varies. Aluminum, copper, brass, galvanized steel, coatings, plastics, and elastomers should be identified before selecting a cleaner.
Selected formulations may be suitable for pressure washing or spray-cleaning equipment. Foaming characteristics, dilution, equipment compatibility, runoff collection, and wastewater requirements should be reviewed before use.
Rinsing requirements vary by product and the next process. Some cleaners require rinsing, while selected products may leave a temporary corrosion-inhibiting film. Follow the current technical data sheet.
Parts should be adequately dry and free from incompatible residue before packaging. If a protective film remains, confirm that it is compatible with the VpCI® bag, film, paper, coating, or subsequent operation.
Certain Cortec® cleaners are classified as biodegradable or contain biobased ingredients. These characteristics apply only to specific formulations and do not determine how contaminated wastewater must be handled.
Yes. ECORR Systems can review the contaminant, substrate, cleaning process, equipment, temperature, dilution, rinsing requirements, and corrosion protection needs to help identify an appropriate Cortec® product.