VpCI-395 Long Term Waterborne Epoxy Primer Part B 1 Gal.
VpCI-395 is a waterborne epoxy primer that provides excellent adhesion, humidity and long-term corrosion protection to steel and aluminum. VpCI-395 differs from other epoxy primers by minimizing long-term embrittlement and removing fast dry time (20-30 minutes to completely dry) as well as excellent corrosion resistance. Testing shows VpCI -395
outperforms comparable epoxies by up to 20%. Its water-based formulation makes it easier to comply with environmental regulations governing solvents and VOC limits. Clean up is easy by using soap and water.
Mix 4.5 parts of Part A to 0.5 parts of Part B. Mix until a uniform coating is obtained. After mixing, do not apply paint for at least 30 minutes.
The pot life of VpCI?-395 is approximately 4 hours at 75?F (24?C). This value may change depending upon the temperature and size of the batch. Water should be used for dilutions. Care should be taken since the viscosity may drop rapidly. VpCI?-395 may be applied by spray or brush. A film thickness of 1.5 mils (37 microns) or greater is recommended. The coating dries in about 20-30 minutes. However, it takes approximately one week before VpCI -395 is fully cured. Top coats can be applied between 30 minutes and 4 hours after the primer is applied, depending upon the type of top coat and drying conditions.
UNITED STATES SHIPPING CLASSIFICATION:
Does not recover from freezing.
UNITED STATES SHIPPING CLASSIFICATION: Hazardous when shipping via ground and air.
NOTE: This product classified as hazardous for shipment via ground and air and is subject to a HAZMAT fee of $27.50 for ground and $37.50 for air shipment. Any applicable fees are NOT calculated at checkout and will be charged separately. A Customer Service representative will contact you with details at time of shipment.
PACKAGING: VpCI -395 (parts A and B) is available in five gallon (19 Liter) kits [4.5 gallons Part A (17 L) / 0.5 gallons Part B (2 L)]. Do not allow product to freeze.
UNITED STATES SHIPPING CLASSIFICATION: Hazardous.
NOTE: This product classified as hazardous for shipment via UPS and is subject to a HAZMAT fee of $27.50 for ground shipment and $37.50 for air shipment. These fees are NOT calculated at checkout and will be charged separately. A Customer Service representative will contact you with details at time of shipment.
UNITED STATES SHIPPING CLASSIFICATION: Does not recover from freezing. MUST be shipped via heated truck
Products should be stored in tightly closed containers in heated warehouse to avoid freezing. Minimum storage temperature: 32 degrees F (0 degrees C). Maximum storage temperature: 120 degrees F (49 degrees C)
IMPORTANT: Lead time may be substantially increased during winter months due to freezing conditions.