Cortec MilCorr® VpCI® Shrink Film 20' x 210'
MilCorr® VpCI® Shrink Film is a heavy duty film featuring Cortec multimetal Vapor phase Corrosion Inhibitors. MilCorr® VpCI® Shrink Film provides a top-notch universal protection system with high ultraviolet (UV) light protection to maintain the integrity of the film itself as well as the parts packaged within.
MilCorr® VpCI® Shrink Film can replace conventional rust preventatives such as oils and desiccants. Parts protected with MilCorr® are ready to use with no additional cleaning and/or degreasing necessary, saving you time and money.
Metal parts packaged in MilCorr® receive continuous protection against salt air and humid environments, moisture, aggressive industrial atmospheres, and dissimilar metal corrosion. The corrosion inhibitors vaporize and condense on all metal surfaces within the enclosed space, and diffuse to every area of your part; protecting its exterior as well as void spaces and recessed areas. You get complete product storage protection as well as during domestic and overseas shipments, virtually eliminating any rust claims.
MilCorr® VpCI® Shrink Film, in conjunction with other Cortec® products, provides a total turnkey preservation for long term outdoor storage.
Cortec is a world leader in rust and corrosion removal and protection. Cortec VpCI products offer cost-effective and environmentally friendly corrosion protection solutions that are bio-degradable, self replenishing and provide multi-metal protection.
- Provides UV protection for outdoor storage
- Multimetal corrosion inhibition providing contact-, barrier-, and vapor-phase protection.
- Superior mechanical properties
- Will shrink using a wide variety of shrink tools including electric and; propane heat guns
- Provides a unitized, tight, and tamper-proof load
- Extra protection for outdoor storage and export shipments
- Effective in severe outdoor climates
- Immediate use of protected object upon removal
- Recyclable and non-toxic
MilCorr® VpCI® Shrink Film is compatible with and protects the following metals:
1.Measure unit and determine amount of film needed, allowing at least 12” overlap at all seams.
2. Lay out film in desired preparation area, making sure it is clean and dry. 3.Place vehicle or equipment on film.
4.Pad off any sharp edges and corners.
5.Wrap or Shroud equipment with film.
6.Use shrink tape to attach loose ends onto film/equipment. 7.Carefully apply heat and shrink film to desired fit.
Typical shrink temperature range: 340°-440°F (171°-227°C) Typical sealing temperature: 240°-320°F (116°-160°C)
SHELF LIFE: Up to 24 months.
PACKAGING AND STORAGE: Each roll is approximately 20' x 210' (6.1 m x 30.5 m). MilCorr VpCI Shrink Film is available in sheeting and tubing form. Film should be stored indoors at ambient conditions, sealed in original packaging.
Thickness: 10 Mil
Weight: 210 lbs.